Spesialverktøy

Viser 73–84 av 96 resultater

  • Replaceable belt tensioner wrench set

    Specially designed for tight space usage, and with its 13pcs adapters, this tool is universally suitable. Use for releasing the bolts used on tensioner, timing and auxiliary pulleys. Adapters contents: Double ended: 12, 13, 14, 15, 16, 17, 18, 19mm. Single ended: E10, E12, E14, E16, E18. 3/8″ x15 adapter.

  • Repsett drivakselgjenger

    kr 596.00 eks. mva

    8 deler thread restoring die set used to clean or repair axle threads on spindles of M24 x 1.50, M24 x 2.00, M22 x 1.00, M22 x 1.5, M20 x 1.25, M20 x 1.25, 13/16″ x 20UNEF, 3/4″ x 20UNEF.? Use with 1-1/4″ socket pr wrench.

  • Repsett for oljeplugger

    114PCS OIL DRAIN REPAIR KIT

  • Repsett gjenger bremsecalipter

    kr 1,044.00 eks. mva

    For repairing the guide pen threads in the wheel bearing housing. With disassembly of guide ping while changing the brake pads the internal threads are frequently destroyed. The defective threads are repaired professionally and quickly with a heavy duty rustproof high-grade steel threaded bush. Contents: Replacement bushes with copper ring M9X1.25 ( packing unit 10 pcs) Special core drill Special tap M9X1.25 Hex key 7 mm Applicable: FORD, OPEL, VW, AUDI.

  • Ruteuttakersett

    kr 510.00 eks. mva
    • Contents:2520-Glasses rubber knife
                       2522A – Wire
                       2522B – Wire feeder tool
                       2525A – Trim pad remover
                       2525B – Windshield molding release tool
  • Set of fake glow plugs, injectors and fake adaptors for petrol systems

  • Sett for O2 sensor

    kr 577.00 eks. mva

    Inneholder: #1: 1/2″DR. x 29mm x 90mmL (7mm slot) #2: 3/8″DR. x 7/8″ x 90mmL (20mm slot) #3: 1/2″DR. x 27mm (12pt) x 82mmL #4: 3/8″DR. x 7/8″ x 80mmL (7mm slot) #5: 3/8″DR. x 1-1/16″ x 74mmL #6: 1/2″DR. x 22mm x 50mmL (90?) #7: 3/8″DR. x 22mm x 31mmL (90?)

  • Spring compression set Macpherson

    MACPHERSON SPRING DUMPER
    EXTRACTOR (REPLACEABLE)
    MAX LOAD: 10200 N
    1- MAIN BODY
    1- EXTENDED BRACKET
    3- PAIRS OF JAWS

  • Steering system removal and install sleeve kit

    * Universal application of step disc fits many kinds of different vehicles
    * Easy work to remove and install for
    Bearing bush/Silent bearing/Hydraulic bearing/Rubber bearing
    * Force Screw-L:450mm(4 pieces)(with 27mm HEX nut):
    M10 x P1.5/M12 x P2.0/M14 x P2.0/M16x P2.5
    * External Sleeve Diameter
    * Sleeve’A'(11 pcs)Gold:
    D44 x d34/D46 x d36/D54 x d44/D56 x d46/D58 x d48/D66 x d56/D68 x d58/D70 x d60/D78 x d68/D80 x d70/D82 x d72
    * Sleeve ‘B’ (9 pieces) Silver:D48 x d38/D50 x d40/D52 x d42/D60 x d50/D62 x d52/D64 x d54/D72 x d62/D74 x d64/D76 x d66

  • Stempelring klemme

    kr 136.00 eks. mva

    WRINKLE-BAND PISTON RING
    COMPRESSOR
    ˙ LOW FRICTION: WRINKLE-BAND CUTS FRICTION IN
    HALF, SO RING SLIDE ON EASILY
    ˙ WRINKLE-BAND CAN’T SLIP DOWN INTO CYLINDER
    ˙ CAM OPERATED: SET ADJUSTABLE SCREW JUST ONCE
    FOR ENTIRE SET OF PISTONS
    ˙ INSERT A FULL SET OF PISTONS IN HALF THE TIME,
    WITH HALF THE WORK
    ˙ ADJUSTABLE BAND EXPANDS FROM 3″~5″ (76mm~127mm)

  • Tanklokkavtager

    kr 400.00 eks. mva

    Jaw adjustable range:122~199mm,suitable for different fuel tank lid. ?Special jaws design to remove & install the tank closely. ?Use with 3/8″ DR. Wrench

  • Tanklokknøkkel

    An innovative tool for the removal and fitting of fuel gauge sender collars. Adjustable to suit for most collars from 89 to 170mm.

Viser 73–84 av 96 resultater