Spesialverktøy

Viser 25–36 av 96 resultater

  • Autommatic transmission oil filling kit

    kr 990.00 eks. mva

    15deler Set for refilling fluids such as ATF, gear oil and differential oil. * Especially designed for vehicles without a transmission dipstick. * A combination of pneumatic and manual functions allow energy-saving work and precise refilling. * 12.5L large tank suitable for transmissions that require large refill volume.

  • Avdrager

    kr 390.00 eks. mva

    Verktøy til å trykke ut bolt i hjullagerhus framaksel på:
    AUDI: A4, A6, A8 QUATTRO
    SKODA SUPERB

  • Avdrager reimhjul

    kr 790.00 eks. mva

    PULLER FOR RIBBED DRIVE PULLEYS

  • Bærekule avdragersett

    kr 1,464.00 eks. mva

    Specially design to remove and install the ball joint on car without removing any parts. Applicable:W220,W211,W203, W215. Patented.

  • Boltuttrekker 8-21mm 12 deler

    Use on the damaged screws & nuts.? Special spiral design for easier to remove the damaged screws.? Size: 3/8″ Dr. 8, 9, 10, 11, 12, 13mm (Length:32mm) 1/2″ Dr. 14, 15, 16, 17, 18, 19, 21mm (Length:34mm) 2pcs pin punches 72, ,80mm ? Camplete size for all you need.

  • Brake Bleeder Wrench Set

    kr 900.00 eks. mva

    These specialist brake bleeder wrenches (part number 6783) are designed to simplify brake bleeding and the additional ease of access will in many cases let the operator bleed the brakes without removing the road wheels. Clean and lubricate the bleed valve then fit the wrench over it; the wrench’s internal seal and built-in socket fits snugly over the valve. The bleed tube is then fitted onto the nipple that is built into the wrench (a 1.2 metre length of silicone tube complete with one-way valve is supplied). Thus the wrench can be turned and repositioned without any fear of dragging against the bleed tube, or separating the bleed tube from the valve. To turn further, just lift the handle of the wrench, reposition, then continue turning. Six sizes of wrench are supplied in the set, to cover most popular applications:7mm, 8mm, 9mm, 10mm, 11mm and 12 mm, all colour-coded for easy identification. Ideal for both brake and clutch hydraulic systems, the wrench set is supplied in a sturdy blow-mould case with internal foam to keep the wrenches and tube secure and tidy.

  • Bremsenøkler sett

    kr 250.00 eks. mva

    8×10, 9×11, 10×12, 13x14mm

  • Bremserørkutter

    kr 359.00 eks. mva

    SMART SPRING TUBE CUTTER

  • Bremserørnøkkel 10-11mm

    kr 9,975.00 eks. mva

    Spesialverktøy for bremserør. Chrome-molybdenum steel Special design with cover for holding the nut completely and prevent slips.

  • Bremserørnøkkel 10-12mm

    kr 84.00 eks. mva

    Spesialverktøy for bremserør. Chrome-molybdenum steel Special design with cover for holding the nut completely and prevent slips.

  • Cambermåler

    • Angle adjustable with the magnet attaching on the alignmagnet tool you working on.
    • Applicable with JTC-1840 or JTC-1002.
  • Clutch alignment tool 11 deler

    11 PCS CLUTCH ALIGNMENT TOOL
    KIT
    FOR HUB DIA. 23-36mm, ESPECIALLY RENAULT

Viser 25–36 av 96 resultater