Lakkrelaterte produkter
Viser 73–84 av 94 resultater
-
U-Pol S2081Ev Uhs Clearcoat 1L
Ultra high solids acrylic coating recommended for all basecoats. Easy to use with a dust coat followed by a full coat with no flash off required between coats.
Cure time can be reduced by up to 30-50% when used with S2005EV Accelerator, (application and enviroment dependent).* High build UV resistant coating
* Excellent flow and non-sag properties
* Use only with S2038EV and S2039EV hardeners -
U-Pol S2081Ev Uhs Clearcoat 5L
Ultra high solids acrylic coating recommended for all basecoats. Easy to use with a dust coat followed by a full coat with no flash off required between coats.
Cure time can be reduced by up to 30-50% when used with S2005EV Accelerator, (application and enviroment dependent).* High build UV resistant coating
* Excellent flow and non-sag properties
* Use only with S2038EV and S2039EV hardeners -
U-Pol Smc Carbon Fibre Reinforced Filler Black 1.1L
High adhesion bonding paste and filling compound specifically designed to repair cracks, holes and scratches in SMC, fiberglass, composite and other rigid materials.
- Reinforced with carbon fibre for structural strength
- Easy to sand to a fine finish
-
U-Pol Speed glaze
DOLPHIN™ SPEED GLAZE
DOLPHIN™
Dolphin Speed Glaze er en avansert, lettvekts, ultra-raskt herdende finishing glaze spesiellt laget for å reparere riper, steinsprut skader og pinholes. Ved bruk av “Snap Cure” teknologi, herder den opp til 3 ganger raskere enn standard glaze.
- Opp til 3 x raskere herding (6-8 minutes ved 20 C)
- Løsemiddelsikker
- Utmerket til å fylle pinhole og riper
- Superenkel å slipe
- Ultra-fin finish
- Selvutjevnende
-
U-Pol Stronghold 904 sort 200ml
High strength adhesive for applications requiring a long open time and good gap filling capabilities. Suitable applications include door skins, body kits, small panels and sectional replacements.
Bonds to metal, aluminium, SMC, composites and fibreglass
Withstands temperatures up to 140°c
Good impact resistant properties -
U-Pol Stronghold 915 sort 200ml
Fast curing, non-shrinking adhesive. Ideal for bonding thermoplastic olefins plastics such as PP, PP-EPDM and EPDM.
Ideal for fast fix bonding such as splits and tears
Excellent sanding and feather-edging properties
Non-sag -
U-Pol Stronghold 915 sort 50ml
Fast curing, non-shrinking adhesive. Ideal for bonding thermoplastic olefins plastics such as PP, PP-EPDM and EPDM.
Ideal for fast fix bonding such as splits and tears
Excellent sanding and feather-edging properties
Non-sag -
U-Pol System 2002 Panel Wipe Slow 5L
Anti-static and anti-silicone panel wipe with aggressive degreasing action to remove contaminants such as wax, grease and silicones. It is suitable for use on bare metal and existing paint surfaces prior to any painting operation. Two speeds available with fast evaporation ideal for localised panel repairs and slow degreaser for larger repairs.
- Does not attack existing paint films
- Effectively removes contaminants and static
- Compatible with most paint systems
-
U-Pol System 2003 Plastic Primer 1L
Universal plastic primer, promotes adhesion of paints, adhesives and sealants to most plastics prior to the application of colour.
- Ideal for use on difficult to coat plastics such as thermoplastic olefins (TPO)
- Fast drying
- Easy to apply
-
U-Pol System 2021 UHS Primer Grey 3L
A fast drying, multi-purpose primer offering the functionality of ‘2 products in 1’ – primer filler and primer surfacer. High adhesion and corrosion resistance make it suitable for spot repairs to full panel applications.
- Excellent build and opacity
- Fast drying
- Use with S2030 and S2032 hardeners
-
U-Pol System 2025 Hs Primer Black 1L
A multi-purpose primer offering the functionality of ‘2 products in 1’ – primer filler and primer surfacer. It is suitable for spot repairs to full panel applications which can be air dried, low baked or I.R. cured.
- Easy to sand and gives perfect gloss hold out
- Excellent build, opacity and filling power
- Use with S2030 and S2032 hardeners
-
U-Pol System 2025 Hs Primer Grey 3L
A multi-purpose primer offering the functionality of ‘2 products in 1’ – primer filler and primer surfacer. It is suitable for spot repairs to full panel applications which can be air dried, low baked or I.R. cured.
- Easy to sand and gives perfect gloss hold out
- Excellent build, opacity and filling power
- Use with S2030 and S2032 hardeners
Viser 73–84 av 94 resultater